How do I print a larger board on a single page in Boardmaker Version 6?

October 31, 2019

  1. Determine the paper size and orientation necessary for your board.
Note: Each template board will specify the correct paper size and orientation in the upper left corner of the board.
  1. Choose File.
  2. Choose Print Setup.
  3. Change the Paper Size and Orientation settings as needed.
  4. Click the Print Setup button if the current printer page settings are not correct.
  5. Click OK when finished.
  6. Make sure the correct printer is selected.
  7. Choose the correct paper size and orientation for your board.
  8. Click OK when finished.
  9. Click on the Use Printer Page button. This will set the board’s size to match the page size, which is determined by the printer settings.
  10. Check that all buttons on the board actually fit within the new board dimensions by choosing File > Print Preview.
Please note: If you are making a large custom board, you may enter appropriate dimensions up to the numbers listed in the Maximum column, which correspond to three pages across by two pages down